This site uses cookies. By continuing to browse the ConceptDraw site you are agreeing to our Use of Site Cookies.
"HVAC (stands for Heating, Ventilation and Air Conditioning) is a control system that applies regulation to a heating and/ or air conditioning system. Usually a sensing device is used to compare the actual state (e.g., temperature) with a target state. Then the control system draws a conclusion what action has to be taken (e.g., start the blower).
More complex HVAC systems can interface to Building Automation System (BAS) to allow the building owners to have more control over the heating or cooling units. The building owner can monitor the system and respond to alarms generated by the system from local or remote locations." [HVAC control system. Wikipedia]
The vector stencils library "HVAC control equipment" contains 48 symbols of heating, ventilation, air conditioning, refrigeration and automated building control equipment.
Use the design elements library HVAC control equipment to draw HVAC plans, schematic diagrams of heating, ventilation, air conditioning, refrigeration and automated building control systems, environmental control design building plans and equipment layouts using the ConceptDraw PRO diagramming and vector drawing software.
The shapes library HVAC control equipment is contained in the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC control equipment symbols
HVAC control equipment symbols, water flow meter, vane axial fan, pitch control, valve, unit heater, supply duct, return duct, pump, propeller fan, pipe flow arrow, pipe, multi fan section, magnetic, starter, humidifier, heating, cooling, coil, heat exchanger, plate and tube, filter, fan coil housing, equipment, duct extension, duct, damper, cooling tower, converter, chiller, centrifugal fan, boiler
, air flow station, VSD, variable speed drive, VAV box, variable air volume box, DD-VAV box, double, duct, variable air volume box, VAV box, constant volume box, CV box,
The vector stencils library "HVAC control equipment" contains 48 HVAC symbols. Use it for drawing HVAC systems diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design building plans and equipment layouts. The symbols example "HVAC control equipment - Vector stencils library" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
Duct, sgl line
Duct, sgl line, duct,
Duct, dbl line
Duct, dbl line, duct,
Return duct, sgl line
Return duct, sgl line, return duct,
Return duct, dbl line
Return duct, dbl line, return duct,
Supply duct, sgl line
Supply duct, sgl line, supply duct,
Supply duct, dbl line
Supply duct, dbl line, supply duct,
Return duct 2, sgl line
Return duct 2, sgl line, supply duct,
Return duct 2, dbl line
Return duct 2, dbl line, supply duct,
Supply duct extension, sgl line
Supply duct extension, sgl line, duct extension,
Supply duct extension, dbl line
Supply duct extension, dbl line, duct extension,
Return duct extension, sgl line
Return duct extension, sgl line, duct extension,
Return duct extension, dbl line
Return duct extension, dbl line, duct extension,
2-fan section, sgl line
2-fan section, sgl line, multi fan section,
2-fan section, dbl line
2-fan section, dbl line, multi fan section,
3-fan section, sgl line
3-fan section, sgl line, multi fan section,
3-fan section, dbl line
3-fan section, dbl line, multi fan section,
4-fan section, sgl line
4-fan section, sgl line, multi fan section,
4-fan section, dbl line
4-fan section, dbl line, multi fan section,
VAV box
VAV box, VAV box, variable air volume box,
DD-VAV box
DD-VAV box, DD-VAV box, double, duct, variable air volume box, VAV box, constant volume box, CV box,
Fan coil housing
Fan coil housing, fan coil housing,
Unit heater
Unit heater, unit heater,
Centrifugal fan
Centrifugal fan, centrifugal fan,
Propeller fan
Propeller fan, propeller fan,
Vane axial fan
Vane axial fan, vane axial fan, pitch control,
Damper
Damper, damper,
Filter
Filter, filter,
Air flow station
Air flow station, air flow station,
Humidifier
Humidifier, humidifier,
Htg/clg coil
Htg/clg coil, heating, cooling, coil,
Valve
Valve, valve,
Water flow meter
Water flow meter, water flow meter,
Pump
Pump, pump,
, chiller,
Cooling tower
Cooling tower, cooling tower,
Converter
Converter, converter,
Heat exchanger
Heat exchanger, heat exchanger, plate and tube,
Boiler
Boiler, boiler
,
Equipment
Equipment, equipment,
Starter
Starter, magnetic, starter,
VSD
VSD, VSD, variable speed drive,
Side to bottom pipe
Side to bottom pipe, pipe,
Side to bottom pipe, arrow
Side to bottom pipe, arrow, pipe,
Side to side pipe
Side to side pipe, pipe,
Side to side pipe, arrow
Side to side pipe, arrow, pipe,
Top to bottom pipe
Top to bottom pipe, pipe,
Top to bottom pipe, arrow
Top to bottom pipe, arrow, pipe,
Pipe flow arrow
Pipe flow arrow, pipe flow arrow,

pvc pipe furniture plans, pvc pipe plans, plumbing plans examples, How to read plumbing plans? plumbing floor plan, plumbing layout plan, half pipe plans, pipe bender plans, plumbing plan symbols Plumbing and Piping Plans

pvc pipe furniture plans, pvc pipe plans, plumbing plans examples, How to read plumbing plans? plumbing floor plan, plumbing layout plan, half pipe plans, pipe bender plans, plumbing plan symbols
Plumbing and Piping Plans solution extends ConceptDraw PRO v10.2.2 software with samples, templates and libraries of pipes, plumbing, and valves design elements for developing of water and plumbing systems, and for drawing Plumbing plan, Piping plan, PVC Pipe plan, PVC Pipe furniture plan, Plumbing layout plan, Plumbing floor plan, Half pipe plans, Pipe bender plans.
A simple hydraulic schematic showing apparatus for testing the strength of a hydraulic hose splice.
Water enters through normally closed solenoid valve (1) and passes through intake flow meter (2) to high pressure pump (4). Intake water pressure is monitored by pressure gauge (3). The hose to be tested connects between pump (4) and normally open solenoid activated drain valve (7). To test the hose, pump drive motor (5) is turned on, the solenoid of drain valve (7) is activated, closing the valve, and the pump is run to pressurize the hose. Test pressure is monitored by gauge (6). When the test is complete or the hose fails, the solenoid of drain valve (7) is deactivated, opening valve and discharging water, depressurizing the system. All components are operated electrically by a remote control circuit so that the operator may perform the test from a protected location, monitoring it with a camera and video monitor.
This hydraulic schematic example was redrawn using ConceptDraw PRO diagramming and vector drawing software from the Wikimedia Commons file: Hydraulic schematic.jpg.
[commons.wikimedia.org/ wiki/ File:Hydraulic_ schematic.jpg]
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
[creativecommons.org/ licenses/ by-sa/ 3.0/ deed.en]
The hydraulic schematic example "Apparatus for testing the strength of a hydraulic hose splice" is included in the Mechanical Engineering solution from the Engineering area of ConceptDraw Solution Park.
Hydraulic system schematic
Hydraulic system schematic, two-port, two-position, valve, spring, variable spring, non-variable spring, pressure gauge, pressure, gauge, hydraulic pump, flow meter, energy source, electric motor, electric linear, solenoid, callout,

mechanical engineering, mechanical design software, mechanical drawing symbols, mechanical drawing software Mechanical Engineering

mechanical engineering, mechanical design software, mechanical drawing symbols, mechanical drawing software
This solution extends ConceptDraw PRO v.9 mechanical drawing software (or later) with samples of mechanical drawing symbols, templates and libraries of design elements, for help when drafting mechanical engineering drawings, or parts, assembly, pneumatic,