Products Solutions Samples Buy
✕
This site uses cookies. By continuing to browse the ConceptDraw site you are agreeing to our Use of Site Cookies.
Try ConceptDraw Free
This house HVAC floor plan sample shows the ventilation system air supply diffusers and air exhaust grilles layout.
""The intentional introduction of outside air can be categorized as either mechanical ventilation, or natural ventilation. Mechanical ventilation uses fans to drive the flow of outside air into a building. This may be accomplished by pressurization (in the case of positively pressurized buildings), or by depressurization (in the case of exhaust ventilation systems). Many mechanically ventilated buildings use a combination of both, with the ventilation being integrated into the HVAC system. Natural ventilation is the intentional passive flow of outside air into a building through planned openings (such as louvers, doors, and windows). Natural ventilation does not require mechanical systems to move outside air, it relies entirely on passive physical phenomena, such as wind pressure, or the stack effect. Mixed mode ventilation systems use both mechanical and natural processes." [Ventilation (architecture). Wikipedia]
The HVAC floor plan example "House ventilation" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC floor plan
HVAC floor plan, window, casement, wall, supply, duct, sliding glass, return, duct, double door, door, L-room,
Used Solutions
This HVAC schematics sample was redesigned from the Wikimedia Commons file: Ventilation unit with heat pump & ground heat exchanger.png. [commons.wikimedia.org/ wiki/ File:Ventilation_ unit_ with_ heat_ pump_ %26_ ground_ heat_ exchanger.png]
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license. [creativecommons.org/ licenses/ by-sa/ 3.0/ deed.en]
"Heat recovery ventilation, also known as HRV, mechanical ventilation heat recovery, or MVHR, is an energy recovery ventilation system using equipment known as a heat recovery ventilator, heat exchanger, air exchanger, or air-to-air heat exchanger which employs a counter-flow heat exchanger (countercurrent heat exchange) between the inbound and outbound air flow. HRV provides fresh air and improved climate control, while also saving energy by reducing heating (and cooling) requirements.
Energy recovery ventilators (ERVs) are closely related, however ERVs also transfer the humidity level of the exhaust air to the intake air." [Heat recovery ventilation. Wikipedia]
The HVAC schematics example "Ventilation unit with heat pump and ground heat exchanger" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC schematics
HVAC schematics, pump, multi fan section, heat exchanger, plate and tube, equipment,
Used Solutions
HelpDesk

How to Create a HVAC Plan

HVAC Floor Plan
HVAC plans are used to make and maintain systems of a heating and air conditioning. HVAC plan is an important part of bulding planning. It is developed for privat family houses as well as for apartment and public buildings. Making HVAC plans as a part of construction documentation package essential requirement for any building project. Making a plan that shows the location and connection of HVAC equipment involves many different elements that can be managed using ConceptDraw PRO reinforced with HVAC Plans solution. With ConceptDraw PRO you can easily create and communicate HVAC plans of any complexity.

HVAC floor plan, HVAC business plan, HVAC marketing plan, blueprints and plans for HVAC, HVAC business plan sample HVAC Plans

HVAC floor plan, HVAC business plan, HVAC marketing plan, blueprints and plans for HVAC, HVAC business plan sample
Use HVAC Plans solution to create professional, clear and vivid HVAC-systems design plans, which represent effectively your HVAC marketing plan ideas, develop plans for modern ventilation units, central air heaters, to display the refrigeration systems for automated buildings control, environmental control, and energy systems.

house layout, interior design, building plan Building Plans Area

house layout, interior design, building plan
The Building Plans Area collects solutions for drawing the building and site plans.
The vector stencils library "HVAC ductwork" contains 55 ducts, vents and HVAC mechanical components symbols.
Use the design elements library "HVAC ductwork" for drawing the HVAC ductwork system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control and environmental control system layout floor plans.
"Ducts are used in heating, ventilation, and air conditioning (HVAC) to deliver and remove air. These needed airflows include, for example, supply air, return air, and exhaust air. Ducts also deliver, most commonly as part of the supply air, ventilation air. As such, air ducts are one method of ensuring acceptable indoor air quality as well as thermal comfort.
A duct system is often called ductwork. Planning ('laying out'), sizing, optimizing, detailing, and finding the pressure losses through a duct system is called duct design." [Duct (HVAC). Wikipedia]
The shapes library "HVAC ductwork" is included in the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC ductwork symbols
HVAC ductwork symbols, vertical duct, variable bend, duct, transitioning, reducing, duct, supply, duct, straight duct, sliding damper, return, duct, offset, transitioning, reducing, duct, miter bend, duct, junction, duct, flexible, connection, damper, branch duct, beveled junction, duct, Y junction, duct, VAV box, variable air volume box, 3 way junction, three way junction, duct,
Used Solutions
The vector stencils library "HVAC equipment" contains 26 symbols of HVAC equipment as pumps, fans, condensers, pipe coils, silencers, etc.
Use the design elements library "HVAC equipment" for drawing the HVAC system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control and environmental control system layout floor plans using the ConceptDraw PRO diagramming and vector drawing software.
"HVAC (heating, ventilation, and air conditioning) is the technology of indoor and vehicular environmental comfort. HVAC system design is a subdiscipline of mechanical engineering, based on the principles of thermodynamics, fluid mechanics, and heat transfer. Refrigeration is sometimes added to the field's abbreviation as HVAC&R or HVACR, or ventilating is dropped as in HACR (such as the designation of HACR-rated circuit breakers).
HVAC is important in the design of medium to large industrial and office buildings such as skyscrapers and in marine environments such as aquariums, where safe and healthy building conditions are regulated with respect to temperature and humidity, using fresh air from outdoors." [HVAC. Wikipedia]
The shapes library "HVAC equipment" is contained in the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC equipment symbols
HVAC equipment symbols, silencer, rotary, screw pump, screw compressor, rotary pump, compressor, fan, refrigerant receiver, reciprocating pump, reciprocating compressor, pump, pipe coil, moisture eliminator, fan blades, dryer, condenser, water cooled, condenser, chiller, centrifugal pump, centrifugal compressor, centrifugal fan, axial fan, air filter,
Used Solutions

House Plans, home plans, floor plans, home design, house designs, architects, home building and construction, new home plans, home designer, dream home, blueprints Building Design Package

House Plans, home plans, floor plans, home design, house designs, architects, home building and construction, new home plans, home designer, dream home, blueprints

network layout, network floor plan, network visualization, network topologies, network topology mapper Network Layout Floor Plans

network layout, network floor plan, network visualization, network topologies, network topology mapper
Network Layout Floor Plans solution extends ConceptDraw PRO software functionality with powerful tools for quick and efficient documentation the network equipment and displaying its location on the professionally designed Network Layout Floor Plans. Never before creation of Network Layout Floor Plans, Network Communication Plans, Network Topologies Plans and Network Topology Maps was not so easy, convenient and fast as with predesigned templates, samples, examples and comprehensive set of vector design elements included to the Network Layout Floor Plans solution. All listed types of plans will be a good support for the future correct cabling and installation of network equipment.
The vector stencils library "HVAC ductwork" contains 55 duct and vent symbols of HVAC mechanical components. Use it for drawing HVAC ductwork system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design in the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
Rect. duct, closed ends
Rect. duct, closed ends, straight duct,
Rect. duct, open 1 end
Rect. duct, open 1 end, straight duct,
Rect. duct, open both ends
Rect. duct, open both ends, straight duct,
Circ. duct, closed ends
Circ. duct, closed ends, straight duct,
Circ. duct, open 1 end
Circ. duct, open 1 end, straight duct,
Circ. duct, open both ends
Circ. duct, open both ends, straight duct,
Branch duct, rectangular
Branch duct, rectangular, branch duct,
Branch duct, circular
Branch duct, circular, branch duct,
Variable bend
Variable bend, variable bend, duct,
Miter bend
Miter bend, miter bend, duct,
Y junction
Y junction, Y junction, duct,
3 way junction
3 way junction, 3 way junction, three way junction, duct,
Junction 1
Junction 1, junction, duct,
Beveled junction, rect. duct, rect. branch
Beveled junction, rect. duct, rect. branch, beveled junction, duct,
Beveled junction, rect. duct, circ. branch
Beveled junction, rect. duct, circ. branch, beveled junction, duct,
Beveled junction, circ. duct, rect. branch
Beveled junction, circ. duct, rect. branch, beveled junction, duct,
Beveled junction, circ. duct, circ. branch
Beveled junction, circ. duct, circ. branch, beveled junction, duct,
Transition, rect. to rect.
Transition, rect. to rect., transitioning, reducing, duct,
Transition, rect. to circ.
Transition, rect. to circ., transitioning, reducing, duct,
Transition, circ. to rect.
Transition, circ. to rect., transitioning, reducing, duct,
Transition, circ. to circ.
Transition, circ. to circ., transitioning, reducing, duct,
Offset transition, rect. to rect.
Offset transition, rect. to rect., offset, transitioning, reducing, duct,
Offset transition, rect. to circ.
Offset transition, rect. to circ., offset, transitioning, reducing, duct,
Offset transition, circ. to rect.
Offset transition, circ. to rect., offset, transitioning, reducing, duct,
Offset transition, circ. to circ.
Offset transition, circ. to circ., offset, transitioning, reducing, duct,
Flexible connection, rect. duct
Flexible connection, rect. duct, flexible, connection,
Flexible connection, circ. duct
Flexible connection, circ. duct, flexible, connection,
Flexible connection 2, rect. duct
Flexible connection 2, rect. duct, flexible, connection,
Flexible connection 2, circ. duct
Flexible connection 2, circ. duct, flexible, connection,
Supply, rect. duct toward
Supply, rect. duct toward, supply, duct,
Supply, rect. duct away
Supply, rect. duct away, supply, duct,
Supply, rect. duct, elbow away
Supply, rect. duct, elbow away, supply, duct,
Supply, circ. duct toward
Supply, circ. duct toward, supply, duct,
Supply, circ. duct away
Supply, circ. duct away, supply, duct,
Supply, circ. duct, elbow away
Supply, circ. duct, elbow away, supply, duct,
Return, rect. duct toward
Return, rect. duct toward, return, duct,
Return, rect. duct away
Return, rect. duct away, return, duct,
Return, rect. duct, elbow away
Return, rect. duct, elbow away, return, duct,
Return, circ. duct toward
Return, circ. duct toward, return, duct,
Return, circ. duct away
Return, circ. duct away, return, duct,
Return, circ. duct, elbow away
Return, circ. duct, elbow away, return, duct,
Sliding damper, rect. duct
Sliding damper, rect. duct, sliding damper,
Sliding damper, circ. duct
Sliding damper, circ. duct, sliding damper,
Damper, ACD
Damper, ACD, damper,
Damper, BD
Damper, BD, damper,
Damper, FD/AD
Damper, FD/AD, damper,
Damper, MD
Damper, MD, damper,
Damper, SD/AD
Damper, SD/AD, damper,
Vert. duct, rect. duct toward
Vert. duct, rect. duct toward, vertical duct,
Vert. duct, rect. duct away
Vert. duct, rect. duct away, vertical duct,
Vert. duct, rect. duct, elbow away
Vert. duct, rect. duct, elbow away, vertical duct,
Vert. duct, circ. duct toward
Vert. duct, circ. duct toward, vertical duct,
Vert. duct, circ. duct away
Vert. duct, circ. duct away, vertical duct,
Vert. duct, circ. duct, elbow away
Vert. duct, circ. duct, elbow away, vertical duct,
VAV box
VAV box, VAV box, variable air volume box,
Used Solutions