Products Solutions Samples Buy
✕
This site uses cookies. By continuing to browse the ConceptDraw site you are agreeing to our Use of Site Cookies.
Try ConceptDraw Free
The vector stencil library "HVAC control equipment" contains 81 HVAC control equipment icons.
Use it for drawing HVAC system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design floor
plans and equipment layouts.
"HVAC (stands for Heating, Ventilation and Air Conditioning) is a control system that applies regulation to a heating and/ or air conditioning system. Usually a sensing device is used to compare the actual state (e.g., temperature) with a target state. Then the control system draws a conclusion what action has to be taken (e.g., start the blower).
More complex HVAC systems can interface to Building Automation System (BAS) to allow the building owners to have more control over the heating or cooling units. The building owner can monitor the system and respond to alarms generated by the system from local or remote locations." [HVAC control system. Wikipedia]
The vector stencils example "Design elements - HVAC control equipment" is included in HVAC Plans solution from the Building Plans area of ConceptDraw Solution
Park.
HVAC control equipment symbols
HVAC control equipment symbols, water flow meter, vane axial fan, pitch control, valve, unit heater, supply duct, return duct, refrigerant liquid, refrigerant discharge, pump, propeller fan, pipe flow arrow, pipe, multi fan section, medium-pressure steam, medium-pressure return, makeup water, magnetic, starter, low-pressure steam, low-pressure return, humidifier, humidification line, hot water heating supply, hot water heating return, high-pressure steam, high-pressure return, heating, cooling, coil, heat exchanger, plate and tube, fuel oil vent, fuel oil suction, fuel oil return, filter, feedwater pump discharge, fan coil housing, equipment, duct extension, duct, drain, damper, cooling tower, converter, condenser water supply, condenser water return, condensate or vacuum pump discharge, compressed air, chiller, chilled water supply, chilled water return, centrifugal fan, boiler blow off, boiler , air relief line, air flow station, VSD, variable speed drive, VAV box, variable air volume box, DD-VAV box, double, duct, variable air volume box, VAV box, constant volume box, CV box,
Used Solutions
The vector stencil library "HVAC equipment" contains 84 HVAC equipment symbols as pumps, fans, condensers, pipe coils, silencers, etc.
Use it for drawing HVAC system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design floor
plans and equipment layouts.
"HVAC (heating, ventilation, and air conditioning) is the technology of indoor and vehicular environmental comfort. HVAC system design is a subdiscipline of mechanical engineering, based on the principles of thermodynamics, fluid mechanics, and heat transfer. Refrigeration is sometimes added to the field's abbreviation as HVAC&R or HVACR, or ventilating is dropped as in HACR (such as the designation of HACR-rated circuit breakers).
HVAC is important in the design of medium to large industrial and office buildings such as skyscrapers and in marine environments such as aquariums, where safe and healthy building conditions are regulated with respect to temperature and humidity, using fresh air from outdoors." [HVAC. Wikipedia]
The vector stencils example "Design elements - HVAC equipment" is included in HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC equipment symbols
HVAC equipment symbols, zone damper, water tower, ventilator, valve, vacuum pump, vacuum gauge, unit ventilator, unit heater, thermometer, the heater, the filter, surface air cooler, supply air grill, strainer, steam separator, steam, solenoid valve, solenoid air valve, silencer, rotary, screw pump, screw compressor, rotary pump, compressor, fan, return air grill, relief valve, regulator, refrigerant receiver, reciprocating pump, reciprocating compressor, pump, primary filter, mid-effect filter, pressurizer system, pressure/electric switch, pressure-reducing valve, pressure gauge and cock, preheating system, pipeline, pipe network, pipe coil, ozone generator, oxygen-enriched filter, outside air duct, nozzle, moisture eliminator, modulating return air capillary thermostat, membrane clear box, louver opening, humidifier, high efficiency filter, heat engine, flow valve, fan blades, fan and motor with belt guard, exhaust hood, duplex strainer, dryer, dehumidifying system, cooling coil, condenser, water cooled, condenser, condensate tank, cold water pump, chiller, centrifugal pump, centrifugal compressor, centrifugal fan, booster fan, boiler, axial fan, automatic 3-way valve, automatic 2-way valve, airline valve, air volume control valve, air filter, air compressor, access door,
Used Solutions

Interior Design. Registers, Drills and Diffusers — Design Elements

The interior design project for any home, flat, business center includes the set of different plans and documents, among them obligatory are the ceiling plans. For creation these plans will be convenient to use professional drawing software. It is especially useful in cases when you need create and propose for customer the multiple alternative design plans for choice. ConceptDraw DIAGRAM diagramming and vector drawing software extended with Reflected Ceiling Plan solution is the choice of architects, designers, electricians, and other building-related people. It is ideal for displaying the ceiling design ideas which meet any requirements of building and budget. Included templates, samples and especially wide selection of vector design elements, including the elements offered by Registers, Drills and Diffusers library are helpful in drawing without efforts professional-looking Reflected Ceiling plans, Reflective Ceiling plans, Lighting Plans, Electrical Plans, Plans of location the outlets, grilles, diffusers, registers, light fixtures, light panels, etc.
The vector stencil library "HVAC ductwork" contains 63 duct and vent symbols.
Use it for drawing HVAC system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design floor
plans and equipment layouts.
"Ducts are used in heating, ventilation, and air conditioning (HVAC) to deliver and remove air. These needed airflows include, for example, supply air, return air, and exhaust air. Ducts also deliver, most commonly as part of the supply air, ventilation air. As such, air ducts are one method of ensuring acceptable indoor air quality as well as thermal comfort.
A duct system is often called ductwork. Planning ('laying out'), sizing, optimizing, detailing, and finding the pressure losses through a duct system is called duct design." [Duct (HVAC). Wikipedia]
The vector stencils example "Design elements - HVAC ductwork" is included in HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
HVAC ductwork symbols
HVAC ductwork symbols, vertical duct, variable bend, duct, transitioning, reducing, duct, supply, duct, supply duct-section, straight duct, sliding damper, return, duct, offset, transitioning, reducing, duct, miter bend, duct, manual volume damper, louver opening, junction, duct, flexible, connection, fire damper with access door, fan and motor with belt guard, exhaust, return or outside air duct-section, damper, branch duct, beveled junction, duct, automatic volume damper, Y junction, duct, VAV box, variable air volume box, 3 way junction, three way junction, duct,
Used Solutions

The vector stencils library "HVAC control equipment" contains 48 HVAC symbols. Use it for drawing HVAC systems diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design building plans and equipment layouts. The symbols example "HVAC control equipment - Vector stencils library" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
Duct, sgl line
Duct, sgl line, duct,
Duct, dbl line
Duct, dbl line, duct,
Return duct, sgl line
Return duct, sgl line, return duct,
Return duct, dbl line
Return duct, dbl line, return duct,
Supply duct, sgl line
Supply duct, sgl line, supply duct,
Supply duct, dbl line
Supply duct, dbl line, supply duct,
Return duct 2, sgl line
Return duct 2, sgl line, supply duct,
Return duct 2, dbl line
Return duct 2, dbl line, supply duct,
Supply duct extension, sgl line
Supply duct extension, sgl line, duct extension,
Supply duct extension, dbl line
Supply duct extension, dbl line, duct extension,
Return duct extension, sgl line
Return duct extension, sgl line, duct extension,
Return duct extension, dbl line
Return duct extension, dbl line, duct extension,
2-fan section, sgl line
2-fan section, sgl line, multi fan section,
2-fan section, dbl line
2-fan section, dbl line, multi fan section,
3-fan section, sgl line
3-fan section, sgl line, multi fan section,
3-fan section, dbl line
3-fan section, dbl line, multi fan section,
4-fan section, sgl line
4-fan section, sgl line, multi fan section,
4-fan section, dbl line
4-fan section, dbl line, multi fan section,
VAV box
VAV box, VAV box, variable air volume box,
DD-VAV box
DD-VAV box, DD-VAV box, double, duct, variable air volume box, VAV box, constant volume box, CV box,
Fan coil housing
Fan coil housing, fan coil housing,
Unit heater
Unit heater, unit heater,
Centrifugal fan
Centrifugal fan, centrifugal fan,
Propeller fan
Propeller fan, propeller fan,
Vane axial fan
Vane axial fan, vane axial fan, pitch control,
Damper
Damper, damper,
Filter
Filter, filter,
Air flow station
Air flow station, air flow station,
Humidifier
Humidifier, humidifier,
Htg/clg coil
Htg/clg coil, heating, cooling, coil,
Valve
Valve, valve,
Water flow meter
Water flow meter, water flow meter,
Pump
Pump, pump,
, chiller,
Cooling tower
Cooling tower, cooling tower,
Converter
Converter, converter,
Heat exchanger
Heat exchanger, heat exchanger, plate and tube,
Boiler
Boiler, boiler ,
Equipment
Equipment, equipment,
Starter
Starter, magnetic, starter,
VSD
VSD, VSD, variable speed drive,
Side to bottom pipe
Side to bottom pipe, pipe,
Side to bottom pipe, arrow
Side to bottom pipe, arrow, pipe,
Side to side pipe
Side to side pipe, pipe,
Side to side pipe, arrow
Side to side pipe, arrow, pipe,
Top to bottom pipe
Top to bottom pipe, pipe,
Top to bottom pipe, arrow
Top to bottom pipe, arrow, pipe,
Pipe flow arrow
Pipe flow arrow, pipe flow arrow,
Used Solutions

HVAC floor plan, HVAC business plan, HVAC marketing plan, blueprints and plans for HVAC, HVAC business plan sample HVAC Plans

HVAC floor plan, HVAC business plan, HVAC marketing plan, blueprints and plans for HVAC, HVAC business plan sample
Use HVAC Plans solution to create professional, clear and vivid HVAC-systems design plans, which represent effectively your HVAC marketing plan ideas, develop plans for modern ventilation units, central air heaters, to display the refrigeration systems for automated buildings control, environmental control, and energy systems.
The vector stencils library "HVAC equipment" contains 26 symbols of HVAC equipment. Use it for drawing HVAC system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control and environmental control system layout floor plans in the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
Rotary pump
Rotary pump, rotary pump, compressor, fan,
Pump
Pump, pump,
Centrifugal pump
Centrifugal pump, centrifugal pump, centrifugal compressor,
Fan blades, hor.
Fan blades, hor., fan blades,
Fan blades, vert.
Fan blades, vert., fan blades,
Fan blades, 4
Fan blades, 4, fan blades,
Reciprocating pump
Reciprocating pump, reciprocating pump, reciprocating compressor,
Screw pump
Screw pump, rotary, screw pump, screw compressor,
Centrifugal fan
Centrifugal fan, centrifugal fan,
Centrifugal fan 2
Centrifugal fan 2, centrifugal fan,
Axial fan
Axial fan, axial fan,
Axial fan 2
Axial fan 2, axial fan,
Moisture eliminator
Moisture eliminator, moisture eliminator,
Condenser
Condenser, condenser,
Condenser, plate type
Condenser, plate type, condenser, water cooled,
Condenser, coil type
Condenser, coil type, condenser, water cooled,
Air filter
Air filter, air filter,
Dryer
Dryer, dryer,
Silencer
Silencer, silencer,
Silencer 2
Silencer 2, silencer,
Pipe coil
Pipe coil, pipe coil,
Pipe coil, fins
Pipe coil, fins, pipe coil,
Pipe coil, plate
Pipe coil, plate, pipe coil,
Pipe coil, plate, fins
Pipe coil, plate, fins, pipe coil,
Refrigerant receiver
Refrigerant receiver, refrigerant receiver,
Chiller
Chiller, chiller,
Used Solutions
The vector stencils library "HVAC ductwork" contains 55 duct and vent symbols of HVAC mechanical components. Use it for drawing HVAC ductwork system diagrams, heating, ventilation, air conditioning, refrigeration, automated building control, and environmental control design in the ConceptDraw PRO diagramming and vector drawing software extended with the HVAC Plans solution from the Building Plans area of ConceptDraw Solution Park.
Rect. duct, closed ends
Rect. duct, closed ends, straight duct,
Rect. duct, open 1 end
Rect. duct, open 1 end, straight duct,
Rect. duct, open both ends
Rect. duct, open both ends, straight duct,
Circ. duct, closed ends
Circ. duct, closed ends, straight duct,
Circ. duct, open 1 end
Circ. duct, open 1 end, straight duct,
Circ. duct, open both ends
Circ. duct, open both ends, straight duct,
Branch duct, rectangular
Branch duct, rectangular, branch duct,
Branch duct, circular
Branch duct, circular, branch duct,
Variable bend
Variable bend, variable bend, duct,
Miter bend
Miter bend, miter bend, duct,
Y junction
Y junction, Y junction, duct,
3 way junction
3 way junction, 3 way junction, three way junction, duct,
Junction 1
Junction 1, junction, duct,
Beveled junction, rect. duct, rect. branch
Beveled junction, rect. duct, rect. branch, beveled junction, duct,
Beveled junction, rect. duct, circ. branch
Beveled junction, rect. duct, circ. branch, beveled junction, duct,
Beveled junction, circ. duct, rect. branch
Beveled junction, circ. duct, rect. branch, beveled junction, duct,
Beveled junction, circ. duct, circ. branch
Beveled junction, circ. duct, circ. branch, beveled junction, duct,
Transition, rect. to rect.
Transition, rect. to rect., transitioning, reducing, duct,
Transition, rect. to circ.
Transition, rect. to circ., transitioning, reducing, duct,
Transition, circ. to rect.
Transition, circ. to rect., transitioning, reducing, duct,
Transition, circ. to circ.
Transition, circ. to circ., transitioning, reducing, duct,
Offset transition, rect. to rect.
Offset transition, rect. to rect., offset, transitioning, reducing, duct,
Offset transition, rect. to circ.
Offset transition, rect. to circ., offset, transitioning, reducing, duct,
Offset transition, circ. to rect.
Offset transition, circ. to rect., offset, transitioning, reducing, duct,
Offset transition, circ. to circ.
Offset transition, circ. to circ., offset, transitioning, reducing, duct,
Flexible connection, rect. duct
Flexible connection, rect. duct, flexible, connection,
Flexible connection, circ. duct
Flexible connection, circ. duct, flexible, connection,
Flexible connection 2, rect. duct
Flexible connection 2, rect. duct, flexible, connection,
Flexible connection 2, circ. duct
Flexible connection 2, circ. duct, flexible, connection,
Supply, rect. duct toward
Supply, rect. duct toward, supply, duct,
Supply, rect. duct away
Supply, rect. duct away, supply, duct,
Supply, rect. duct, elbow away
Supply, rect. duct, elbow away, supply, duct,
Supply, circ. duct toward
Supply, circ. duct toward, supply, duct,
Supply, circ. duct away
Supply, circ. duct away, supply, duct,
Supply, circ. duct, elbow away
Supply, circ. duct, elbow away, supply, duct,
Return, rect. duct toward
Return, rect. duct toward, return, duct,
Return, rect. duct away
Return, rect. duct away, return, duct,
Return, rect. duct, elbow away
Return, rect. duct, elbow away, return, duct,
Return, circ. duct toward
Return, circ. duct toward, return, duct,
Return, circ. duct away
Return, circ. duct away, return, duct,
Return, circ. duct, elbow away
Return, circ. duct, elbow away, return, duct,
Sliding damper, rect. duct
Sliding damper, rect. duct, sliding damper,
Sliding damper, circ. duct
Sliding damper, circ. duct, sliding damper,
Damper, ACD
Damper, ACD, damper,
Damper, BD
Damper, BD, damper,
Damper, FD/AD
Damper, FD/AD, damper,
Damper, MD
Damper, MD, damper,
Damper, SD/AD
Damper, SD/AD, damper,
Vert. duct, rect. duct toward
Vert. duct, rect. duct toward, vertical duct,
Vert. duct, rect. duct away
Vert. duct, rect. duct away, vertical duct,
Vert. duct, rect. duct, elbow away
Vert. duct, rect. duct, elbow away, vertical duct,
Vert. duct, circ. duct toward
Vert. duct, circ. duct toward, vertical duct,
Vert. duct, circ. duct away
Vert. duct, circ. duct away, vertical duct,
Vert. duct, circ. duct, elbow away
Vert. duct, circ. duct, elbow away, vertical duct,
VAV box
VAV box, VAV box, variable air volume box,
Used Solutions