Products Solutions Samples Buy
✕
This site uses cookies. By continuing to browse the ConceptDraw site you are agreeing to our Use of Site Cookies.
Try ConceptDraw Free
The vector stencils libraries "Pipes 1" and "Pipes 2" contain 28 and 48 pipe, tubing and fitting symbols, respectively.
"A fitting is used in pipe plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, and for other purposes, such as regulating or measuring fluid flow. The term plumbing is generally used to describe conveyance of water, gas, or liquid waste in ordinary domestic or commercial environments, whereas piping is often used to describe high-performance (e.g. high pressure, high flow, high temperature, hazardous materials) conveyance of fluids in specialized applications. The term tubing is sometimes used for lighter-weight piping, especially types that are flexible enough to be supplied in coiled form.
Fittings (especially uncommon types) require money, time, materials, and tools to install, so they are a non-trivial part of piping and plumbing systems." [Piping and plumbing fitting. Wikipedia]
Use the design elements libraries "Pipes 1" and "Pipes 2" for drawing plumbing and piping building plans, schematic diagrams, blueprints, or technical drawings of waste water disposal systems, hot and cold water supply systems using the ConceptDraw PRO diagramming and vector drawing software.
The shapes libraries "Pipes 1" and "Pipes 2" are contained in the Plumbing and Piping Plans solution from the Building Plans area of ConceptDraw Solution Park.
Piping symbols
Piping symbols, tundish, syphon drain, swivel joint, strainer, soldered, solvent, socket, spigot, socket weld, sleeve joint, separator, screwed joint, open vent, liquid seal, joint, hydrant, flanged, bolted, flame arrester, exhaust silencer, exhaust head, end cap, electrically insulated, electrically bonded, drain silencer, butt weld, bursting disc, bell mouth, Y strainer,
Used Solutions
The vector stencils library "Valves" contains 91 symbols of piping and plumbing valves.
"A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically valves fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction.
People in developed nations use valves in their daily lives, including plumbing valves, such as taps for tap water, gas control valves on cookers, small valves fitted to washing machines and dishwashers, safety devices fitted to hot water systems..." [Valve. Wikipedia]
Use the design elements library "Valves" to draw building plans, schematic diagrams, blueprints, or technical drawings of industrial piping systems; process, vacuum, and fluids piping; hydraulics piping; air and gas piping; materials distribution; and liquid transfer systems using the ConceptDraw PRO diagramming and vector drawing software.
The shapes library "Valves" is included in the Plumbing and Piping Plans solution from the Building Plans area of ConceptDraw Solution Park.
Valve symbols
Valve symbols, weight loaded, actuating method, wedge gate valve, wedge valve, valve, statically loaded, actuating method, spring loaded, actuating method, solenoid, screw-down valve, lock-shield valve, reel valve, valve, remotely controlled, actuating method, relief valve, valve, relief angle valve, relief valve, angle valve, valve, pressure, vacuum, regulating, method of control, reducing valve, valve, quick, open, close, opening, closing, powered valve, valve, power signal, plug valve, valve, piston, parallel slide valve, parallel valve, valve, needle valve, valve, motor element, mixing valve, valve, manual isolation, in-line valve, valve, globe valve, valve, gear operated, actuating method, gate valve, valve, float operated, actuating method, float operated valve, valve, flanged valve, valve, diaphragm, actuating method, diaphragm valve, valve, dash-pot, connecting unit, check valve, valve, characterized port valve, valve, chain operated, actuating method, butterfly valve, valve, ball valve, valve, angle valve, valve, 3-way plug valve, plug valve, valve,
Used Solutions
The vector stencils library "Valves and fittings" contains 104 symbols of valve components.
Use these icons for drawing industrial piping systems; process, vacuum, and fluids piping; hydraulics piping; air and gas piping; materials distribution; and liquid transfer systems.
"A valve is a device that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically valves fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure.
The simplest, and very ancient, valve is simply a freely hinged flap which drops to obstruct fluid (gas or liquid) flow in one direction, but is pushed open by flow in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. ...
Valves are found in virtually every industrial process, including water & sewage processing, mining, power generation, processing of oil, gas & petroleum, food manufacturing, chemical & plastic manufacturing and many other fields. ...
Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve, examples of this type of valve found commonly are safety valves fitted to hot water systems or boilers.
More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements." [Valve. Wikipedia]
The example "Design elements - Valves and fittings" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Chemical and Process Engineering solution from the Engineering area of ConceptDraw Solution Park.
Valves and fittings symbols
Valves and fittings symbols, wedge gate valve, valve manifold, tundish, swivel joint, strainer, stop check valve, soldered, solvent, socket, spigot, socket, spigot, socket weld, sleeve joint, separator, screwed sleeve, screwed joint, screw-down valve, screw-down check valve, relief valve, relief angle valve vacuum, relief angle valve pressure, reel valve, reducing valve, reducer, powered valve, plug valve straight through, plug valve T point, plug valve L point, plug valve 3 way, plug valve, parallel slide valve, open vent, needle valve, lock-shield valve, liquid seal, joint, hydrant, globe valve, gate valve, float operated valve, flanged valve, flanged joint, bolted joint, flame arrester, exhaust silencer, exhaust head, end cap socket and spigot, end cap screwed, end cap quick release, end cap flanged and bolted, end cap fillet welded, end cap butt welded, end cap screwed and plugged, end cap, electrically insulated, electrically bonded, drain silencer, diaphragm valve, check valve, characterized port valve, butterfly valve, butt weld, bursting disc, bell mouth, ball valve, angle valve, Y strainer, 3-way plug valve,
Used Solutions
The vector stencils libraries "Pipes 1" and "Pipes 2" contain 28 and 48 pipe, tubing and fitting symbols, respectively.
"Pipe is hollow cylinder used to conduct or transfer fluids (liquids and gases) from one place to other place. The main difference between pipe and tube is the critical dimension used to describe the pipe size or the tube size. For pipe, internal diameter (ID) roughly corresponds to the nominal pipe size for standard wall thickness. For tube, the outer diameter (OD) closely corresponds to the tube size. In current European standards pipes and tubes are nowadays described as outside diameter by wall thickness. The three standard types of pipe ends used in the piping industriesare; Plain Ends (PE), Threaded Ends (TE) and Beveled Ends (BE). In the past, many types of material have been used in conveying water from one point to another. Masonry and wood were probably the first materials used. Plastics are the newest, and are now being used quite extensively." [Piping. Wikipedia]
Use the design elements libraries "Pipes 1" and "Pipes 2" for drawing plumbing and piping building plans, schematic diagrams, blueprints, or technical drawings of waste water disposal systems, hot and cold water supply systems using the ConceptDraw PRO diagramming and vector drawing software.
The shapes libraries "Pipes 1" and "Pipes 2" are contained in the Plumbing and Piping Plans solution from the Building Plans area of ConceptDraw Solution Park.
Piping symbols
Piping symbols, weight device, vibratory device, trap, support, anchor, stopper, stirring, fan, spray device, sleeved, sleeve joint, sleeved, expansion sleeve joint, sleeved, sleeve extension, signal line, route radiation, rotary motion, reducer, pneumatic line, pipe bore change, mechanical linkage, lagged, junction, jacketed, internal connection, hydraulic line, hunger, heated, cooled, guide, flow restrictor, flow indication, flexible hose, flexibility provision, expansion loop, electrical device, electric line, elbow, double branch, crossing, cross, capillary line, bellows, basic support, anchor, access points,
Used Solutions
The vector stencils library "Industrial equipment" contains 81 symbols of pumps, compressors, fans, turbines, and power generators.
Use these shapes to design pumping systems, air and fluid compression systems, and industrial process diagrams.
"Process engineering focuses on the design, operation, control, and optimization of chemical, physical, and biological processes. Process engineering encompasses a vast range of industries, such as chemical, petrochemical, mineral processing, advanced material, food, pharmaceutical, and biotechnological industries. The application of systematic computer-based methods to process engineering is process systems engineering." [Process engineering. Wikipedia]
The example "Design elements - Industrial equipment" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Chemical and Process Engineering solution from the Engineering area of ConceptDraw Solution Park.
Industrial equipment symbols
Industrial equipment symbols, tank truck, tank car, skip hoist, screw conveyor, conveyor, screen, scraper conveyor, conveyor, rotary filter, filter, roll crusher, ribbon, blender, prill tower, overhead conveyor, conveyor, mixer rotary, mixer fluidized, mixer can, mixer, mill vibrator, mill roller, mill jet, mill impact, mill hammer, mill general, kneader wheel, kneader rolling, kneader blade, kneader ball, kneader, hoist with hook, hoist with grab, hoist, hammer crusher, gyratory, breaker, fluid separator, separator, filter, elevator, electromagnet, electric motor, double cone blender, double blender, blender, cyclone, hydroclone, cyclone, crusher single load, crusher roller, crusher medium, crusher jaw, crusher impact, crusher high-speed roller, crusher hammer, crusher fine, crusher cone, crusher coarse, crusher, conveyor wheel, conveyor, centrifuge, dehydrator, centrifuge submersion, centrifuge, briquetting machine, briquetting, boom loader, batch tray dryer, dryer, batch filter, filter, ball mill,
Used Solutions
The vector stencils library "Vessels" contains 40 symbols of vessels, containers, tanks, drums, and basins.
Use these shapes for drawing process flow diagrams (PFD), materials handling systems, and feed systems in industrial and manufacturing processes.
"A pressure vessel is a closed container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.
The pressure differential is dangerous and fatal accidents have occurred in the history of pressure vessel development and operation. Consequently, pressure vessel design, manufacture, and operation are regulated by engineering authorities backed by legislation. For these reasons, the definition of a pressure vessel varies from country to country, but involves parameters such as maximum safe operating pressure and temperature." [Pressure vessel. Wikipedia]
The example "Design elements - Vessels" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Chemical and Process Engineering solution from the Engineering area of ConceptDraw Solution Park.
Vessel symbols
Vessel symbols, water surface, vessel, drum, pressure vessel, tray, solid, column, tray, dashed, column, tray column, storage sphere, open tank, gas holder, gas cylinder, fluid contacting, vessel, flanged access point, covered tank, floating roof, sump, covered tank, floating roof, covered tank, fixed roof, sump, covered tank, fixed roof, column, closed tank, sump, closed tank, peaked roof, closed tank, clarifier, setting tank, carrying vessel, moveable, carrying vessel, cargo, carrying vessel, branch fitting, barrel, bag, autoclave, propeller agitator, autoclave, helical agitator, autoclave, anchor agitator, access point,
Used Solutions
The vector stencils library "Valves and fittings" contains 104 symbols of valve components.
Use these icons for drawing industrial piping systems; process, vacuum, and fluids piping; hydraulics piping; air and gas piping; materials distribution; and liquid transfer systems in the ConceptDraw PRO software extended with the Chemical and Process Engineering solution from the Chemical and Process Engineering area of ConceptDraw Solution Park.
www.conceptdraw.com/ solution-park/ engineering-chemical-process
Electrically bonded
Electrically bonded, electrically bonded,
Bursting disc
Bursting disc, bursting disc,
Flame arrester
Flame arrester, flame arrester,
Strainer
Strainer, strainer,
Separator
Separator, separator,
Exhaust silencer
Exhaust silencer, exhaust silencer,
Bell mouth
Bell mouth, bell mouth,
Exhaust head
Exhaust head, exhaust head,
Hydrant
Hydrant, hydrant,
Drain silencer
Drain silencer, drain silencer,
Liquid seal open/closed
Liquid seal open/closed, liquid seal,
Y strainer
Y strainer, Y strainer,
Gate valve
Gate valve, gate valve,
Globe valve
Globe valve, globe valve,
Globe valve 2
Globe valve 2, gate valve,
Globe valve 3
Globe valve 3, gate valve,
Screw-down valve
Screw-down valve, screw-down valve,
Lock-shield valve
Lock-shield valve, lock-shield valve,
Reel valve
Reel valve, reel valve,
Check valve
Check valve, check valve,
Check valve 2
Check valve 2, check valve,
Check valve 3
Check valve 3, check valve,
Screw-down check valve
Screw-down check valve, screw-down check valve,
Stop check valve
Stop check valve, stop check valve,
Diaphragm valve
Diaphragm valve, diaphragm valve,
Diaphragm valve 2
Diaphragm valve 2, diaphragm valve,
Diaphragm valve 3
Diaphragm valve 3, diaphragm valve,
Powered valve
Powered valve, powered valve,
Powered valve 2
Powered valve 2, powered valve,
Powered valve 3
Powered valve 3, powered valve,
Needle valve
Needle valve, needle valve,
Needle valve 2
Needle valve 2, needle valve,
Needle valve 3
Needle valve 3, needle valve,
Relief valve
Relief valve, relief valve,
Relief valve 2
Relief valve 2, relief valve,
Relief valve 3
Relief valve 3, relief valve,
Angle valve
Angle valve, angle valve,
Angle valve 2
Angle valve 2, angle valve,
Angle valve 3
Angle valve 3, angle valve,
Angle valve 4
Angle valve 4, angle valve,
Float operated valve
Float operated valve, float operated valve,
Float operated valve 2
Float operated valve 2, float operated valve,
Flanged valve
Flanged valve, flanged valve,
Butterfly valve
Butterfly valve, butterfly valve,
Butterfly valve 2
Butterfly valve 2, butterfly valve,
Wedge gate valve
Wedge gate valve, wedge gate valve,
Parallel slide valve
Parallel slide valve, parallel slide valve,
Ball valve
Ball valve,
Ball valve 2
Ball valve 2, ball valve,
Ball valve 3
Ball valve 3, ball valve,
Relief angle valve vacuum
Relief angle valve vacuum, relief angle valve vacuum,
Relief angle valve pressure
Relief angle valve pressure, relief angle valve pressure,
Reducing valve
Reducing valve, reducing valve,
Reducing valve 2
Reducing valve 2, reducing valve,
Plug valve 3 way
Plug valve 3 way, plug valve 3 way,
Plug valve L point
Plug valve L point, plug valve L point,
Plug valve 2
Plug valve 2, plug valve,
Plug valve
Plug valve, plug valve,
Plug valve straight through
Plug valve straight through, plug valve straight through,
Plug valve T point
Plug valve T point, plug valve T point,
3-way plug valve
3-way plug valve, 3-way plug valve,
3-way plug valve 2
3-way plug valve 2, 3-way plug valve,
3-way plug valve 3
3-way plug valve 3, 3-way plug valve,
Mixing valve
Mixing valve,
Valve Manifold
Valve Manifold, valve manifold,
Characterized port valve
Characterized port valve, characterized port valve,
Reducer
Reducer, reducer,
Reducer 2
Reducer 2, reducer,
General joint
General joint, joint,
Butt weld
Butt weld, butt weld,
Butt weld 2
Butt weld 2, butt weld,
Butt weld 3
Butt weld 3,
Butt weld 4
Butt weld 4, butt weld,
Flanged/ bolted
Flanged/ bolted, flanged joint, bolted joint,
Soldered / solvent
Soldered / solvent,
Soldered / solvent 2
Soldered / solvent 2, soldered, solvent,
Screwed joint
Screwed joint, screwed joint,
Screwed joint 2
Screwed joint 2, screwed joint,
Screwed joint 3
Screwed joint 3, screwed joint,
Socket and spigot
Socket and spigot, socket, spigot,
Socket and spigot 2
Socket and spigot 2, socket, spigot,
Socket and spigot 3
Socket and spigot 3, socket, spigot,
Sleeve
Sleeve, sleeve joint,
Sleeve 2
Sleeve 2,
Screwed sleeve
Screwed sleeve, screwed sleeve,
Screwed sleeve 2
Screwed sleeve 2,
Socket weld
Socket weld,
Socket weld 2
Socket weld 2, socket weld,
Swivel joint
Swivel joint, swivel joint,
Swivel joint 2
Swivel joint 2, swivel joint,
Swivel joint 3
Swivel joint 3, swivel joint,
End cap
End cap, end cap,
End cap butt welded
End cap butt welded, end cap butt welded,
End cap screwed
End cap screwed, end cap screwed,
End cap socket and spigot
End cap socket and spigot, end cap socket and spigot,
End cap fillet welded
End cap fillet welded, end cap fillet welded,
End cap screwed and plugged
End cap screwed and plugged, end cap screwed and plugged,
End cap quick release
End cap quick release, end cap quick release,
End cap flanged and bolted
End cap flanged and bolted, end cap flanged and bolted,
End cap flanged and bolted 2
End cap flanged and bolted 2, end cap flanged and bolted,
Electrically insulated
Electrically insulated, electrically insulated,
Tundish
Tundish, tundish,
Syphon drain
Syphon drain,
Open vent
Open vent, open vent,
Used Solutions
The vector stencils library "Valves" contains 91 symbols of valves. Use it for drawing plumbing and piping plans, schematic diagrams and blueprints of industrial piping systems; process, vacuum, and fluids piping; hydraulics piping; air and gas piping; materials distribution; and liquid transfer systems in the ConceptDraw PRO diagramming and vector drawing software extended with the Plumbing and Piping Plans solution from the Building Plans area of ConceptDraw Solution Park.
In-line valve
In-line valve, in-line valve, valve,
3-way valve
3-way valve, in-line valve, valve,
4-way valve
4-way valve, in-line valve, valve,
Screw-down valve
Screw-down valve, screw-down valve, lock-shield valve, reel valve, valve, stop cock,
Lock-shield valve
Lock-shield valve, screw-down valve, lock-shield valve, reel valve, valve,
Reel valve
Reel valve, screw-down valve, lock-shield valve, reel valve, valve,
Relief valve
Relief valve, relief valve, valve,
Relief valve 2
Relief valve 2, relief valve, valve,
Relief valve 3
Relief valve 3, relief valve, valve,
Relief valve 4
Relief valve 4, relief valve, valve,
Angle valve
Angle valve, angle valve, valve,
Angle valve 2
Angle valve 2, angle valve, valve,
Angle valve 3
Angle valve 3, angle valve, valve,
Angle valve 4
Angle valve 4, angle valve, valve,
Check valve
Check valve, check valve, valve,
Check valve 2
Check valve 2, check valve, valve,
Screwdown valve
Screwdown valve, check valve, valve,
Float operated valve
Float operated valve, float operated valve, valve,
Float operated valve 2
Float operated valve 2, float operated valve, valve,
Flanged valve
Flanged valve, flanged valve, valve,
Flanged valve 2
Flanged valve 2, flanged valve, valve,
Butterfly valve
Butterfly valve, butterfly valve, valve,
Butterfly valve 2
Butterfly valve 2, butterfly valve, valve,
Globe valve
Globe valve, globe valve, valve,
Globe valve 2
Globe valve 2, globe valve, valve,
Globe valve 3
Globe valve 3, globe valve, valve,
Needle valve
Needle valve, needle valve, valve,
Needle valve 2
Needle valve 2, needle valve, valve,
Needle valve 3
Needle valve 3, needle valve, valve,
Needle valve 4
Needle valve 4, needle valve, valve,
Diaphragm valve
Diaphragm valve, diaphragm valve, valve,
Diaphragm valve 2
Diaphragm valve 2, diaphragm valve, valve,
Diaphragm valve 3
Diaphragm valve 3, diaphragm valve, valve,
Wedge gate valve
Wedge gate valve, wedge gate valve, wedge valve, valve,
Parallel side valve
Parallel side valve, parallel slide valve, parallel valve, valve,
Gate valve
Gate valve, gate valve, valve,
Ball valve
Ball valve, ball valve, valve,
Ball valve 2
Ball valve 2, ball valve, valve,
Ball valve 3
Ball valve 3, ball valve, valve,
Powered control valve
Powered control valve, powered valve, valve,
Powered control valve 2
Powered control valve 2, powered valve, valve,
Powered control valve 3
Powered control valve 3, powered valve, valve,
Relief angle valve, pressure
Relief angle valve, pressure, relief angle valve, relief valve, angle valve, valve, pressure, vacuum,
Relief angle valve, vacuum
Relief angle valve, vacuum, relief angle valve, relief valve, angle valve, valve, pressure, vacuum,
Reducing valve
Reducing valve, reducing valve, valve,
Reducing valve 2
Reducing valve 2, reducing valve, valve,
Plug valve
Plug valve, plug valve, valve,
Plug valve 2
Plug valve 2,
Plug valve, straight through
Plug valve, straight through,
3-way plug valve
3-way plug valve, plug valve, valve,
Plug valve, T-port
Plug valve, T-port,
Plug valve, L-port
Plug valve, L-port,
3-way plug valve
3-way plug valve, 3-way plug valve, plug valve, valve,
3-way plug valve 2
3-way plug valve 2, 3-way plug valve, plug valve, valve,
3-way plug valve 3
3-way plug valve 3, 3-way plug valve, plug valve, valve,
3-way plug valve, T-port
3-way plug valve, T-port, 3-way plug valve, plug valve, valve,
3-way plug valve, L-port
3-way plug valve, L-port, 3-way plug valve, plug valve, valve,
Mixing valve
Mixing valve, mixing valve, valve,
Characterized port valve
Characterized port valve, characterized port valve, valve,
Manual isolation
Manual isolation, manual isolation,
Power signal
Power signal, power signal,
Statically loaded
Statically loaded, statically loaded, actuating method,
Spring loaded
Spring loaded, spring loaded, actuating method,
Spring loaded 2
Spring loaded 2, spring loaded, actuating method,
Remote control
Remote control, remotely controlled, actuating method,
Diaphragm
Diaphragm, diaphragm, actuating method,
Diaphragm, positioner
Diaphragm, positioner, diaphragm, actuating method,
Chain operated
Chain operated, chain operated, actuating method,
Gear operated
Gear operated, gear operated, actuating method,
Solenoid
Solenoid, solenoid,
Weight loaded
Weight loaded, weight loaded, actuating method,
Weight loaded 2
Weight loaded 2, weight loaded, actuating method,
Weight loaded 3
Weight loaded 3, weight loaded, actuating method,
Float operated
Float operated, float operated, actuating method,
Float operated 2
Float operated 2, float operated, actuating method,
Dash-pot
Dash-pot, dash-pot,
Dash-pot 2
Dash-pot 2, dash-pot,
Piston
Piston, piston,
Quick opening
Quick opening, quick, open, close, opening, closing,
Quick opening 2
Quick opening 2, quick, open, close, opening, closing,
Quick closing
Quick closing, quick, open, close, opening, closing,
Quick closing 2
Quick closing 2, quick, open, close, opening, closing,
Connecting unit
Connecting unit, connecting unit,
Connecting unit 2
Connecting unit 2, connecting unit,
Connecting unit 3
Connecting unit 3, connecting unit,
Motor element
Motor element, motor element,
Motor element, opens on failure
Motor element, opens on failure, motor element,
Motor element, closes on failure
Motor element, closes on failure, motor element,
Motor element, retains position on fail
Motor element, retains position on fail, motor element,
Motor element, safe direction
Motor element, safe direction, motor element,
Regulating
Regulating, regulating, method of control,
Used Solutions
The vector stencils library "Vessels" contains 40 symbols of vessels, containers, tanks, drums, and basins.
Use it for drawing industrial and manufacturing process flow diagrams, materials handling systems, and feed systems in the ConceptDraw PRO software extended with the Chemical and Process Engineering solution from the Chemical and Process Engineering area of ConceptDraw Solution Park.
www.conceptdraw.com/ solution-park/ engineering-chemical-process
Tray (dashed)
Tray (dashed), tray, dashed, column,
Tray (solid)
Tray (solid), tray, solid, column,
Water surface
Water surface, water surface,
Branch fitting
Branch fitting, branch fitting,
Access point
Access point, access point,
Flanged access point
Flanged access point, flanged access point,
Vessel flat ends
Vessel flat ends, vessel, drum, pressure vessel,
Vessel curved ends
Vessel curved ends, vessel, drum, pressure vessel,
Vessel angled ends
Vessel angled ends, vessel, drum, pressure vessel,
Column
Column, column,
Column (seam)
Column (seam), column,
Tray column
Tray column, tray column,
Fluid contacting
Fluid contacting, fluid contacting, vessel,
Reaction vessel
Reaction vessel,
Open tank with lip
Open tank with lip, open tank,
Open tank
Open tank, open tank,
Clarifier
Clarifier, clarifier, setting tank,
Closed tank
Closed tank, closed tank,
Closed tank (peaked roof)
Closed tank (peaked roof), closed tank, peaked roof,
Closed tank (sump)
Closed tank (sump), closed tank, sump,
Closed tank (sump, peaked roof)
Closed tank (sump, peaked roof),
Covered tank fixed roof
Covered tank fixed roof, covered tank, fixed roof,
Covered tank floating roof
Covered tank floating roof, covered tank, floating roof,
Covered tank fixed roof (sump)
Covered tank fixed roof (sump), covered tank, fixed roof, sump,
Covered tank floating roof (sump)
Covered tank floating roof (sump), covered tank, floating roof, sump,
Gas holder
Gas holder, gas holder,
Storage sphere
Storage sphere, storage sphere,
Barrel
Barrel, barrel,
Gas cylinder
Gas cylinder, gas cylinder,
Bag
Bag, bag,
Carrying vessel moveable
Carrying vessel moveable, carrying vessel, moveable,
Carrying vessel
Carrying vessel, carrying vessel,
Carrying vessel cargo
Carrying vessel cargo, carrying vessel, cargo,
Autoclave anchor
Autoclave anchor, autoclave, anchor agitator,
Autoclave helical
Autoclave helical, autoclave, helical agitator,
Autoclave propeller
Autoclave propeller, autoclave, propeller agitator,
Autoclave anchor (motor)
Autoclave anchor (motor), autoclave, anchor agitator,
Autoclave helical (motor)
Autoclave helical (motor), autoclave, helical agitator,
Autoclave propeller (motor)
Autoclave propeller (motor), autoclave, propeller agitator,
Tank
Tank,
Used Solutions