Products Solutions Samples Buy
✕
This site uses cookies. By continuing to browse the ConceptDraw site you are agreeing to our Use of Site Cookies.
Try ConceptDraw Free
This vector stencils library contains 47 SysML symbols.
Use it to design your state machine diagrams using ConceptDraw PRO diagramming and vector drawing software.
"The state diagram in the Unified Modeling Language is essentially a Harel statechart with standardized notation, which can describe many systems, from computer programs to business processes. In UML 2 the name has been changed to State Machine Diagram. The following are the basic notational elements that can be used to make up a diagram:
- Filled circle, representing to the initial state
- Hollow circle containing a smaller filled circle, indicating the final state (if any)
- Rounded rectangle, denoting a state. Top of the rectangle contains a name of the state. Can contain a horizontal line in the middle, below which the activities that are done in that state are indicated
- Arrow, denoting transition. The name of the event (if any) causing this transition labels the arrow body. A guard expression may be added before a "/ " and enclosed in square-brackets ( eventName[guardExpression] ), denoting that this expression must be true for the transition to take place. If an action is performed during this transition, it is added to the label following a "/ " ( eventName[guardExpression]/ action ).
- Thick horizontal line with either x>1 lines entering and 1 line leaving or 1 line entering and x>1 lines leaving. These denote join/ fork, respectively." [State diagram (UML). Wikipedia]
The vector stencils library "State machine diagram" is included in the SysML solution from the Software Development area of ConceptDraw Solution Park.
Choice pseudostate
Choice pseudostate, choice pseudostate,
Composite state
Composite state, state, initial node, control node, control operator node, composite state,
Entry point
Entry point, entry point,
Exit point
Exit point, exit point,
Final state
Final state, initial node, final state,
History, deep pseudostate
History, deep pseudostate, history, deep pseudostate,
History, shallow pseudostate
History, shallow pseudostate, history, shallow pseudostate,
Initial pseudostate
Initial pseudostate, initial pseudostate,
Junction pseudostate
Junction pseudostate, junction pseudostate,
Receive signal action
Receive signal action, receive signal action,
Send signal action
Send signal action, send signal action,
Action
Action, action,
Region
Region, region, control operator node,
Simple state
Simple state, simple state,
Simple state 2
Simple state 2, simple state,
State list
State list, state list,
State machine
State machine, state machine, initial node, final state, control operator node,
Terminate node
Terminate node, terminate node,
Submachine state
Submachine state, submachine state, exit point, control operator node,
Transition
Transition, transition,
Used Solutions
The vector stencils library "Management list blocks" contains 20 list block shapes: numbered list, bulleted list, bullets.
Use these list elements to design your management infograms.
"In typography, a bullet is a typographical symbol or glyph used to introduce items in a list. ...
The bullet symbol may take any of a variety of shapes, such as circular, square, diamond, arrow, etc. ...
Bullets are most often used in technical writing, reference works, notes and presentations. ...
Bulleted items – known as "bullet points" – may be short phrases, single sentences, or of paragraph length. Bulleted items are not usually terminated with a full stop if they are not complete sentences, although it is not rare to terminate every item except the last one with a semicolon, and terminate the last item with a full stop. It is correct to terminate a bullet point with a full stop if the text within that item consists of one 'full' sentence or more." [Bullet (typography). Wikipedia]
The shapes example "Design elements - Management list blocks" was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Management Infographics solition from the area "Business Infographics" in ConceptDraw Solution Park.
Numbered lists, bulleted lists, bullets
Numbered lists, bulleted lists, bullets, numbered list, bulleted list, bullet symbol, bullet,
Used Solutions
This vector stencils library contains 47 SysML symbols.
Use it to design your state machine diagrams using ConceptDraw PRO diagramming and vector drawing software.
"The state diagram in the Unified Modeling Language is essentially a Harel statechart with standardized notation, which can describe many systems, from computer programs to business processes. In UML 2 the name has been changed to State Machine Diagram. The following are the basic notational elements that can be used to make up a diagram:
- Filled circle, representing to the initial state
- Hollow circle containing a smaller filled circle, indicating the final state (if any)
- Rounded rectangle, denoting a state. Top of the rectangle contains a name of the state. Can contain a horizontal line in the middle, below which the activities that are done in that state are indicated
- Arrow, denoting transition. The name of the event (if any) causing this transition labels the arrow body. A guard expression may be added before a "/ " and enclosed in square-brackets ( eventName[guardExpression] ), denoting that this expression must be true for the transition to take place. If an action is performed during this transition, it is added to the label following a "/ " ( eventName[guardExpression]/ action ).
- Thick horizontal line with either x>1 lines entering and 1 line leaving or 1 line entering and x>1 lines leaving. These denote join/ fork, respectively." [State diagram (UML). Wikipedia]
The vector stencils library "State machine diagram" is included in the SysML solution from the Software Development area of ConceptDraw Solution Park.
Choice pseudostate
Choice pseudostate, choice pseudostate,
Composite state
Composite state, state, initial node, control node, control operator node, composite state,
Entry point
Entry point, entry point,
Exit point
Exit point, exit point,
Final state
Final state, initial node, final state,
History, deep pseudostate
History, deep pseudostate, history, deep pseudostate,
History, shallow pseudostate
History, shallow pseudostate, history, shallow pseudostate,
Initial pseudostate
Initial pseudostate, initial pseudostate,
Junction pseudostate
Junction pseudostate, junction pseudostate,
Receive signal action
Receive signal action, receive signal action,
Send signal action
Send signal action, send signal action,
Action
Action, action,
Region
Region, region, control operator node,
Simple state
Simple state, simple state,
Simple state 2
Simple state 2, simple state,
State list
State list, state list,
State machine
State machine, state machine, initial node, final state, control operator node,
Terminate node
Terminate node, terminate node,
Submachine state
Submachine state, submachine state, exit point, control operator node,
Transition
Transition, transition,
Used Solutions
The vector stencils library "Terminals and connectors" contains 43 element symbols of terminals, connectors, plugs, polarized connectors, jacks, coaxial cables, and conductors.
Use it for drawing the wiring diagrams, electrical layouts, electronic schematics, and circuit diagrams in the ConceptDraw PRO diagramming and vector drawing software extended with the Electrical Engineering solution from the Engineering area of ConceptDraw Solution Park.
www.conceptdraw.com/ solution-park/ engineering-electrical
2-conductor jack
2-conductor jack, 2-conductor, jack,
2-conductor plug
2-conductor plug, 2-conductor, plug,
2-conductor jack 2
2-conductor jack 2, 2-conductor, jack,
2-conductor plug 2
2-conductor plug 2, 2-conductor, plug,
Normalled jacks
Normalled jacks, normalled, jack, circuit,
Normalled jack
Normalled jack, normalled, jack, circuit,
Outside conductor coaxial
Outside conductor coaxial, coaxial, outside conductor,
Center conductor coaxial
Center conductor coaxial, center conductor coaxial, outside conductor, chassis,
Large D connector
Large D connector, large, D connector, D-type connector,
Small D connector
Small D connector, small, D connector, D-type connector,
C header connector
C header connector, C header connector, 15 pin, type C,
Normalled jacks
Normalled jacks, AC out, AC power out,
Сontact, male
Сontact, male, male contact,
Сontact, female
Сontact, female, female contact,
Сontact, male 2
Сontact, male 2, male contact,
Сontact, female 2
Сontact, female 2, female contact,
Adapter, male - male
Adapter, male - male, adapter, male-female,
Adapter, male - male
Adapter, male - male, adapter, male-male,
Circuit terminal
Circuit terminal, circuit terminal,
Terminal board
Terminal board, terminal board, terminal strip,
Cable termination, complete
Cable termination, complete, cable termination, complete,
Cable termination, single-line
Cable termination, single-line, cable termination, single line,
Cable termination, single-line 2
Cable termination, single-line 2, cable termination, single line,
Shielded jack
Shielded jack, shielded, RCA, jack,
Shielded plug
Shielded plug, shielded, RCA, plug,
Coaxial jack
Coaxial jack, coaxial jack,
Coaxial plug
Coaxial plug, coaxial plug,
2-conductor, male
2-conductor, male, 2-conductor, nonpolarized connector, male,
2-conductor, female
2-conductor, female, 2-conductor, nonpolarized connector, female,
2-conductor, male 2
2-conductor, male 2, 2-conductor, nonpolarized connector, male,
2-conductor, female 2
2-conductor, female 2, 2-conductor, nonpolarized connector, female,
2-conductor, male 3
2-conductor, male 3, 2-conductor, nonpolarized connector, male,
2-conductor, female 3
2-conductor, female 3, 2-conductor, nonpolarized connector, female,
3-conductor, male
3-conductor, male, 3-conductor, polarized connector, male,
3-conductor, female
3-conductor, female, 3-conductor, polarized connector, female,
3-conductor, male 2
3-conductor, male 2, 3-conductor, polarized connector, male,
3-conductor, female 2
3-conductor, female 2, 3-conductor, polarized connector, female,
3-conductor, male 3
3-conductor, male 3, 3-conductor, polarized connector, male,
3-conductor, female 3
3-conductor, female 3, 3-conductor, polarized connector, female,
3-conductor, male 4
3-conductor, male 4, 3-conductor, polarized connector, male,
3-conductor, female 4
3-conductor, female 4, 3-conductor, polarized connector, female,
3-conductor, male 5
3-conductor, male 5, 3-conductor, polarized connector, male,
3-conductor, female 5
3-conductor, female 5, 3-conductor, polarized connector, female,
Used Solutions
The vector stencils library "UML state machine diagrams" contains 35 symbols for the ConceptDraw PRO diagramming and vector drawing software.
"The state diagram in the Unified Modeling Language is essentially a Harel statechart with standardized notation, which can describe many systems, from computer programs to business processes. In UML 2 the name has been changed to State Machine Diagram. The following are the basic notational elements that can be used to make up a diagram:
(1) Filled circle, pointing to the initial state.
(2) Hollow circle containing a smaller filled circle, indicating the final state (if any).
(3) Rounded rectangle, denoting a state. Top of the rectangle contains a name of the state. Can contain a horizontal line in the middle, below which the activities that are done in that state are indicated.
(4) Arrow, denoting transition. The name of the event (if any) causing this transition labels the arrow body. A guard expression may be added before a "/ " and enclosed in square-brackets ( eventName[guardExpression] ), denoting that this expression must be true for the transition to take place. If an action is performed during this transition, it is added to the label following a "/ " ( eventName[guardExpression]/ action ).
(5) Thick horizontal line with either x>1 lines entering and 1 line leaving or 1 line entering and x>1 lines leaving. These denote join/ fork, respectively." [State diagram (UML). Wikipedia]
The example "Design elements - UML state machine diagrams" is included in the Rapid UML solution from the Software Development area of ConceptDraw Solution Park.
UML state machine diagram symbols
UML state machine diagram symbols, terminate pseudostate, synch state, subactivity state, sub-machine diagram, state with compartments, simple state, send signal state, receive signal state, note, junction pseudostate, internal behavior, initial state, history pseudostate, frame, fragment, final state, exit point, entry point, composite state, choice pseudostate,
Used Solutions
The vector stencils library "Bank UML state machine diagram" contains 21 shapes for drawing UML state machine diagrams.
Use it for object-oriented modeling of your bank information system.
"The state diagram in the Unified Modeling Language is essentially a Harel statechart with standardized notation, which can describe many systems, from computer programs to business processes. In UML 2 the name has been changed to State Machine Diagram. The following are the basic notational elements that can be used to make up a diagram:
* Filled circle, pointing to the initial state.
* Hollow circle containing a smaller filled circle, indicating the final state (if any).
* Rounded rectangle, denoting a state. Top of the rectangle contains a name of the state. Can contain a horizontal line in the middle, below which the activities that are done in that state are indicated.
* Arrow, denoting transition. The name of the event (if any) causing this transition labels the arrow body. A guard expression may be added before a "/ " and enclosed in square-brackets ( eventName[guardExpression] ), denoting that this expression must be true for the transition to take place. If an action is performed during this transition, it is added to the label following a "/ " ( eventName[guardExpression]/ action ).
* Thick horizontal line with either x>1 lines entering and 1 line leaving or 1 line entering and x>1 lines leaving. These denote join/ fork, respectively." [State machine diagram. Wikipedia]
This example of UML state machine diagram symbols for the ConceptDraw PRO diagramming and vector drawing software is included in the ATM UML Diagrams solution from the Software Development area of ConceptDraw Solution Park.
UML state machine diagram symbols
UML state machine diagram symbols, transition, terminate pseudostate, submachine state, composite state, state machine, simple state, protocol state, simple state, internal activities, simple state, simple composite state, shallow history pseudostate, region, junction pseudostate, initial pseudostate, initial node, fork pseudostate, join pseudostate, final state, exit point pseudostate, entry point pseudostate, deep history pseudostate, composite state, composite icon, composite icon, choice pseudostate,
Used Solutions
The vector stencils library "UML state machine diagrams" contains 35 symbols for the ConceptDraw PRO diagramming and vector drawing software.
"The state diagram in the Unified Modeling Language is essentially a Harel statechart with standardized notation, which can describe many systems, from computer programs to business processes. In UML 2 the name has been changed to State Machine Diagram. The following are the basic notational elements that can be used to make up a diagram:
(1) Filled circle, pointing to the initial state.
(2) Hollow circle containing a smaller filled circle, indicating the final state (if any).
(3) Rounded rectangle, denoting a state. Top of the rectangle contains a name of the state. Can contain a horizontal line in the middle, below which the activities that are done in that state are indicated.
(4) Arrow, denoting transition. The name of the event (if any) causing this transition labels the arrow body. A guard expression may be added before a "/ " and enclosed in square-brackets ( eventName[guardExpression] ), denoting that this expression must be true for the transition to take place. If an action is performed during this transition, it is added to the label following a "/ " ( eventName[guardExpression]/ action ).
(5) Thick horizontal line with either x>1 lines entering and 1 line leaving or 1 line entering and x>1 lines leaving. These denote join/ fork, respectively." [State diagram (UML). Wikipedia]
The example "Design elements - UML state machine diagrams" is included in the Rapid UML solution from the Software Development area of ConceptDraw Solution Park.
UML state machine diagram symbols
UML state machine diagram symbols, terminate pseudostate, synch state, subactivity state, sub-machine diagram, state with compartments, simple state, send signal state, receive signal state, note, junction pseudostate, internal behavior, initial state, history pseudostate, frame, fragment, final state, exit point, entry point, composite state, choice pseudostate,
Used Solutions
"A computer network or data network is a telecommunications network that allows computers to exchange data. In computer networks, networked computing devices (network nodes) pass data to each other along data connections. The connections (network links) between nodes are established using either cable media or wireless media. The best-known computer network is the Internet.
Network devices that originate, route and terminate the data are called network nodes. Nodes can include hosts such as servers and personal computers, as well as networking hardware. Two devices are said to be networked when a device is able to exchange information with another device." [Computer network. Wikipedia]
This computer communication network diagram example was created using the ConceptDraw PRO diagramming and vector drawing software extended with the Computer and Networks solution from the Computer and Networks area of ConceptDraw Solution Park.
Network diagram
Network diagram, workstation, switch, router, hub, firewall, cloud, RAID drive, Comm-link,
Used Solutions